Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
Beide Seiten der vorigen RevisionVorhergehende Überarbeitung | |
embedded_systems:ti_sitara_am335x:beaglebone_blue:start [2023-02-25 07:34] – Urs Graf | embedded_systems:ti_sitara_am335x:beaglebone_blue:start [2023-08-08 13:53] (aktuell) – Urs Graf |
---|
{{:embedded_systems:ti_sitara_am335x:beaglebone_blue:beaglebone_bluebbblue-ttl-2.jpg?400|}} | {{:embedded_systems:ti_sitara_am335x:beaglebone_blue:beaglebone_bluebbblue-ttl-2.jpg?400|}} |
| |
**NOTE**: TX and RX are labelled from the perspective of the UART Cable! Connect the cable/adapter's RX to the pin labelled ''TX'' (Pin 4) and the adapter's TX to ''RX'' (Pin 3). \\ Please also note that you need to power the BeagleBone Blue device by using the generic 5V USB port or the 12V power port! | **NOTE**: TX and RX are labelled from the perspective of the UART Cable! Connect the cable/adapter's RX to the pin labelled ''TX'' (Pin 4) and the adapter's TX to ''RX'' (Pin 3). \\ Please also note that you need to power the BeagleBone Blue device by using the generic 5V USB port or the 12V power port. Beware that the board can only drive motors when powered with 12V! |
| |
You can then connect to the BeagleBone Blue device via serial console (e.g. [[https://www.putty.org/|PuTTY]]) with a baudrate of ''115200''. | You can then connect to the BeagleBone Blue device via serial console (e.g. [[https://www.putty.org/|PuTTY]]) with a baudrate of ''115200''. |