Infoportal
Inhaltsverzeichnis
Drive Board from OST
db11 Board
Features
- 4 Maxon ESCON 50/5 Drives
- Repository on github with Altium files https://github.com/ntb-ch/db11
- Important: keep connections to cb20 reasonably short! Differential line drivers for the encoders are located on the db11. From there single ended lines lead to the cb20.
existing boards
- 6 x db11 2015 (incl. production in 2017)
Supply
The board is supplied with 5V and 3.3V directly from the cb20, see below. On P6 you have to deliver 24V (square pad = Gnd).
Important: Connect GND of P6 with GND of the cb20.
Motor Connection
A simple DC-Motor (single coil) must be connected on P5(Pin 1 and 2).
Connections to the cb20 Board
Connect the following lines when using all 4 drives:
| cb20 | db11 | |||
|---|---|---|---|---|
| Signal | Connector | Pin | Connector | Pin |
| 3.3V | P8 | 1 | P1 | 25 |
| DGND | 2 | 2 | ||
| enc1/A | 3 | 3 | ||
| enc1/B | 4 | 4 | ||
| enc2/A | 5 | 5 | ||
| enc2/B | 6 | 6 | ||
| enc3/A | 7 | 7 | ||
| enc3/B | 8 | 8 | ||
| enc4/A | 9 | 9 | ||
| enc4/B | 10 | 10 | ||
| enable | P9 | 3 | 11 | |
| ready1 | 5 | 12 | ||
| ready2 | 6 | 13 | ||
| ready3 | 7 | 14 | ||
| ready4 | 8 | 15 | ||
| 5V | P10 | 1 | 1 | |
| AGND | 3 | 18 | ||
| dac1 | 5 | 17 | ||
| dac2 | 7 | 19 | ||
| dac3 | 9 | 21 | ||
| dac4 | 11 | 23 | ||