Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
| Beide Seiten der vorigen RevisionVorhergehende ÜberarbeitungNächste Überarbeitung | Vorhergehende Überarbeitung |
| embedded_systems:ti_sitara_am335x:beaglebone_blue:start [2022-09-26 15:35] – Urs Graf | embedded_systems:ti_sitara_am335x:beaglebone_blue:start [2023-08-08 13:53] (aktuell) – Urs Graf |
|---|
| </box> | </box> |
| |
| The BeagleBone Blue is a single board computer with a 1GHz [[embedded_systems:ti_sitara_am335x:start|Texas Instruments Sitara AM335x]] (single core) and 512 MB RAM. Further, there is a HDMI connection, 2 GB eMMC Flash, USB, Ethernet, microSD and various digital I/O and ADC. | The BeagleBone Blue is a single board computer with a 1GHz [[embedded_systems:ti_sitara_am335x:start|Texas Instruments Sitara AM335x]] (single core) microprocessor together with wifi/bluetooth, IMU/barometer, power regulation and state-of-charge LEDs for a 2-cell LiPo, H-Bridges, discrete connectors for 4 DC motors+encoders and 8 servos. |
| |
| |
| {{:embedded_systems:ti_sitara_am335x:beaglebone_blue:beaglebone_bluebbblue-ttl-2.jpg?400|}} | {{:embedded_systems:ti_sitara_am335x:beaglebone_blue:beaglebone_bluebbblue-ttl-2.jpg?400|}} |
| |
| **NOTE**: TX and RX are labelled from the perspective of the UART Cable! Connect the cable/adapter's RX to the pin labelled ''TX'' (Pin 4) and the adapter's TX to ''RX'' (Pin 3). \\ Please also note that you need to power the BeagleBone Blue device by using the generic 5V USB port or the 12V power port! | **NOTE**: TX and RX are labelled from the perspective of the UART Cable! Connect the cable/adapter's RX to the pin labelled ''TX'' (Pin 4) and the adapter's TX to ''RX'' (Pin 3). \\ Please also note that you need to power the BeagleBone Blue device by using the generic 5V USB port or the 12V power port. Beware that the board can only drive motors when powered with 12V! |
| |
| You can then connect to the BeagleBone Blue device via serial console (e.g. [[https://www.putty.org/|PuTTY]]) with a baudrate of ''115200''. | You can then connect to the BeagleBone Blue device via serial console (e.g. [[https://www.putty.org/|PuTTY]]) with a baudrate of ''115200''. |
