Infoportal
Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
| Beide Seiten der vorigen RevisionVorhergehende Überarbeitung | Nächste ÜberarbeitungBeide Seiten der Revision | ||
| embedded_systems:ti_sitara_am335x:beaglebone_blue:writesdcardimage [2018-04-16 01:10] – akunz | embedded_systems:ti_sitara_am335x:beaglebone_blue:writesdcardimage [2018-04-16 01:26] – akunz | ||
|---|---|---|---|
| Zeile 2: | Zeile 2: | ||
| On the Beagle Bone Blue, there is already a preinstalled OS on the eMMC (internal flash memory). It is recommendet to use this OS. If using a newer version, it is not guaranteed that everything is already set up correctly since the image is for more than one Beagle Bone board types. | On the Beagle Bone Blue, there is already a preinstalled OS on the eMMC (internal flash memory). It is recommendet to use this OS. If using a newer version, it is not guaranteed that everything is already set up correctly since the image is for more than one Beagle Bone board types. | ||
| + | |||
| + | It is recommended to use the following image since it fully supports the robotics cape library. With the image from 2018, the robotics cape library does not work due to an issue with the PRU-ICSS driver by the time writing this. | ||
| + | |||
| + | [[https:// | ||
| + | |||
| The following steps describe how to install an OS image onto a SD card using a Linux host. Afterwards, the SD card can be inserted into the BeagleBone board. The board will boot from the SD card. | The following steps describe how to install an OS image onto a SD card using a Linux host. Afterwards, the SD card can be inserted into the BeagleBone board. The board will boot from the SD card. | ||