Dies ist eine alte Version des Dokuments!
Your carrier card must supply the MicroZed board as follows:
Voltage | Signal | Pin |
---|---|---|
5V | 5V | JX1 57, 58, 59, 60 |
3.3V | 3.3V_B34 | JX1 78, 79, 80 |
3.3V | 3.3V_B35 | JX2 78, 79, 80 |
Gnd | 0V | several on JX1 and JX2 |
Other necessary voltages (1.0V, 1.8V, 1.5V, 3.3V) are generated directly on the MicroZed board.
The board will draw approximately 1.2A from the 5V supply.