Infoportal
Dies ist eine alte Version des Dokuments!
Carrier Card Design
Supply
Your carrier card must supply the MicroZed board as follows:
| Voltage | Signal | Pin |
|---|---|---|
| 5V | 5V | JX1 57, 58, 59, 60 |
| 3.3V | 3.3V_B34 | JX1 78, 79, 80 |
| 3.3V | 3.3V_B35 | JX2 78, 79, 80 |
| Gnd | 0V | several on JX1 and JX2 |
Other necessary voltages (1.0V, 1.8V, 1.5V, 3.3V) are generated directly on the MicroZed board.
The board will draw approximately 1.2A from the 5V supply.
ADC
The MicroZed board doesn't incorporate an ADC. Please refer to Adapter für Microzed Board for connecting an external ADC