Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
| Beide Seiten der vorigen RevisionVorhergehende ÜberarbeitungNächste Überarbeitung | Vorhergehende Überarbeitung |
| software:linux:toradex:boot_from_usb [2023-07-21 09:31] – Urs Graf | software:linux:toradex:boot_from_usb [Unbekanntes Datum] (aktuell) – gelöscht - Externe Bearbeitung (Unbekanntes Datum) 127.0.0.1 |
|---|
| ====== Toradex Easy Installer on USB ====== | |
| ===== Booting into Toradex Easy Installer ===== | |
| |
| Download the Toradex Easy Installer from the [[ https://developer.toradex.com/software/toradex-easy-installer#download-toradex-easy-installer | Toradex Wiki ]] and extract the downloaded archive onto a SD Card or USB Stick (FAT32). Insert the into the Board's SD Card slot or USB port and power it on. | |
| |
| Interrupt the boot process (hit any key) to boot into uBoot. Now run ''run bootcmd_mmc1'' to boot from the SD Card or ''run bootcmd_usb0'' to boot from USB. | |
| |
| Note that while Toradex recommends using the ''run distro_bootcmd'' this will boot from the modules internal flash if a bootable image is present. | |
| |
| If you get an error along the lines of ''bootcmd_usb0 no found'' chances are that the board runs an older version of uboot that does not come with distroboot. In that case the bootloader can be updated by flashing a new toradex image [[ https://developer.toradex.com/knowledge-base/flashing-linux-on-imx6-modules | as described here ]]. | |
| |
| Note that if Toradex's ''update.sh'' script fails with ''not space left on device'', you can try increasing the | |
| ''MIN_PARTITION_FREE_SIZE'' in ''update.sh'' to work around the issue. | |
