Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- software:linux:toradex:loading [2023-07-07 14:19] – Urs Graf
+++ software:linux:toradex:loading [Unbekanntes Datum] (aktuell) – gelöscht - Externe Bearbeitung (Unbekanntes Datum) 127.0.0.1
@@ Zeile 1: / Zeile 1: @@
-====== Toradex Colibri i.MX6 ======
-===== Loading Image to a Board =====
-==== RS232 Console ====
-A login shell can be accessed through UART-A on the Colibri Evaluation board with a null modem cable. The communication settings are: 115200 8N1.\\
-If you are using our [[embedded_systems:imx6:cb|Controller Board (cb20)]] you need a special USB/TTL-Serial-UART converter cable. The connector on the board is a 6-pin SIL connector, e.g. [[http://ch.farnell.com/ftdi/ttl-232r-3v3/kabel-usb-ttl-pegel-seriell-umsetzung/dp/1329311]]
-===== Accessing the UART's =====
-UART-A (used for console, see above) and UART-B can be accessed on the cb20 board. Both can be written to with
-<code>
-echo "hello world" | sudo tee /dev/ttymxc0    # for console
-echo "hello world" | sudo tee /dev/ttymxc1    # for UART-B
-</code>
-===== First steps with a newly flashed board =====
-After loading your new rootfs run the ''initial-setup.sh'' script in ''/opt/cb20/bin'' to allow the generation of SSH-Keys. Also the read-write partition mounted at /mnt/data is formatted.

Infoportal