Infoportal
Dies ist eine alte Version des Dokuments!
Toradex Colibri i.MX6 Getting Started
Note that the current config files are not yet uploaded
Old Documentation
The old start page can be found here
Loading images
To load an image from a FTP server, see this section: Loading Image to a Board
Building the kernel and rootfs
For building the kernel and rootfs you will need buildroot. See Toradex i.MX6 Kernel
To build images from scratch see Creating images from scratch
UART
The Colibri IMX6 evaluation board has a RS232 connector to connect to the serial console over UART. Note that you will need a gender changer and a null modem cable/adapter for it to work with a computer.
SSH
The cb20 rootfs includes a ssh daemon for ssh access.
Note that ssh login is disabled for root. You can use the pathos user isntead.
Default Credentials
4.9 images
| user | password |
| root | root |
| pathos | pathosimx6 |
3.14 images
| user | password |
| root | toor |
| pathos | pathosimx6 |
First step with a newly flashed board
After loading your new rootfs run the initial-setup.sh script in /opt/cb20/bin to allow the generation of SSH-Keys. Also the read-write partition mounted at /mnt/data is formatted.
Device tree
The device tree binary for the cb20 and evaluation board can be found on the NTB FTP server (\\inf004\ftp)