Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
| Beide Seiten der vorigen RevisionVorhergehende ÜberarbeitungNächste Überarbeitung | Vorhergehende Überarbeitung |
| software:linux:toradex:toradex-easy-installer [2023-07-21 09:31] – Urs Graf | software:linux:toradex:toradex-easy-installer [2023-07-25 16:58] (aktuell) – Urs Graf |
|---|
| ====== Toradex Easy Installer ====== | ====== Toradex Easy Installer ====== |
| |
| The Toradex Easy Installer is Toradex's recommended option for flashing images onto their modules. The method described below loads the installer into RAM, boots from there and allows to flash a new image. We were currently not able to boot from our current image into the Toradex Easy Installer sitting on a USB stick, see [[software:linux:toradex:boot_from_usb]]. | The Toradex Easy Installer is Toradex's recommended option for flashing images onto their modules. The method described below loads the installer into RAM, boots from there and allows to flash a new image. We were currently not able to boot from our current image into the Toradex Easy Installer sitting on a USB stick, see [[software:linux:toradex:Toradex Easy Installer on USB]]. |
| |
| |
| ===== Getting Toradex Easy Installer ===== | ===== Getting Toradex Easy Installer ===== |
| You need the Colibri evaluation module, see [[embedded_systems:imx6:evm|Colibri Evaluation Board from Toradex]]. Follow instructions on [[https://developer.toradex.com/easy-installer/toradex-easy-installer/loading-toradex-easy-installer|Loading Toradex Easy Installer]] to get the installer and load it via USB OTG into the RAM. First, you have to enter recovery mode, see //Using a command in the bootloader//. If there is no longer any bootloader on the board, follow instructions under //Using hardware mechanism//. Next, load the installer with [[https://developer.toradex.com/easy-installer/toradex-easy-installer/loading-toradex-easy-installer#load-toradex-easy-installer-through-the-usb-otg-interface|these instructions]]. It will now automatically boot into the Toradex Easy Installer. | You need the Colibri evaluation module, see [[embedded_systems:imx6:evm|Colibri Evaluation Board from Toradex]]. Follow instructions on [[https://developer.toradex.com/easy-installer/toradex-easy-installer/loading-toradex-easy-installer|Loading Toradex Easy Installer]] to get the installer and load it via USB OTG into the RAM. First, you have to enter recovery mode, see //Using a command in the bootloader//. If there is no longer any bootloader on the board, follow instructions under //Using hardware mechanism//. Next, load the installer with the instruction given further down on the same website unter //Load Toradex Easy Installer through the USB OTG interface//. It will now automatically boot into the Toradex Easy Installer. |
| |
| |
| </code> | </code> |
| |
| The following window should appear: | You can get the ip address from the Easy Installer command line with ''ip a''. The following window should appear: |
| |
| {{:software:linux:toradex:tezi.png?400|}} | {{:software:linux:toradex:tezi.png?400|}} |
