Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
| Beide Seiten der vorigen RevisionVorhergehende Überarbeitung | |
| software:linux:toradex:toradex_easy_installer_on_usb [2023-07-21 09:56] – Urs Graf | software:linux:toradex:toradex_easy_installer_on_usb [2023-07-25 16:56] (aktuell) – Urs Graf |
|---|
| Note that while Toradex recommends using the ''run distro_bootcmd'' this will boot from the modules internal flash if a bootable image is present. | Note that while Toradex recommends using the ''run distro_bootcmd'' this will boot from the modules internal flash if a bootable image is present. |
| |
| If you get an error along the lines of ''bootcmd_usb0 no found'' chances are that the board runs an older version of uboot that does not come with distroboot. In that case the bootloader can be updated by flashing a new toradex image [[ https://developer.toradex.com/knowledge-base/flashing-linux-on-imx6-modules | as described here ]]. | If you get an error along the lines of ''bootcmd_usb0 not found'' chances are that the board runs an older version of uboot that does not come with distroboot. In that case the bootloader can be updated by flashing a new toradex image [[ https://developer.toradex.com/knowledge-base/flashing-linux-on-imx6-modules | as described here ]]. |
| |
| Note that if Toradex's ''update.sh'' script fails with ''not space left on device'', you can try increasing the | Note that if Toradex's ''update.sh'' script fails with ''no space left on device'', you can try increasing the |
| ''MIN_PARTITION_FREE_SIZE'' in ''update.sh'' to work around the issue. | ''MIN_PARTITION_FREE_SIZE'' in ''update.sh'' to work around the issue. |
| |
| Now proceed with [[software:linux:toradex:toradex-easy-installer#Installing_an_Image|Installing an Image]]. | Now proceed with [[software:linux:toradex:toradex-easy-installer#Installing_an_Image|Installing an Image]]. |
