Beide Seiten der vorigen RevisionVorhergehende ÜberarbeitungNächste Überarbeitung | Vorhergehende Überarbeitung |
software:linux:yocto:cb20 [2023-07-25 16:40] – Urs Graf | software:linux:yocto:cb20 [2023-08-08 13:17] (aktuell) – Urs Graf |
---|
======= CB20 ====== | ======= CB20 ====== |
The ''cb20'' machine provides a platform for our [[embedded_systems:imx6:cb|Controller Board with Colibri Module]] hardware using a real time kernel. | The ''cb20'' machine provides a platform for our [[embedded_systems:imx6:cb|Controller Board with Colibri Module]] hardware using a real time kernel. |
| |
Note that the ''cb20'' machine requires the ''meta-ost-toradex'' layer that is part of [[meta-ost]]. | Note that the ''cb20'' machine requires the ''meta-ost-toradex'' layer that is part of [[meta-ost]]. |
| |
Follow the [[software:linux:yocto:setup|Setup and Building]] guide to set up the build environment and change the machine definition in ''local.conf'' | Follow the [[software:linux:yocto:setup|Setup and Building]] guide to set up the build environment. Fetch board and processor specific repositories: |
| * meta-freescale, github.com/Freescale/meta-freescale.git, branch dunfell |
| * meta-freescale-3rdparty, github.com/Freescale/meta-freescale-3rdparty.git, branch dunfell |
| * meta-toradex-bsp-common, git.toradex.com/meta-toradex-bsp-common.git, branch dunfell-5.x.y |
| * meta-toradex-nxp, git.toradex.com/meta-toradex-nxp.git, branch dunfell-5.x.y |
| |
| Next, add the layers to ''bblayers.conf'' |
| <code> |
| BBLAYERS ?= " \ |
| /home/ubuntu/yocto/poky/meta \ |
| /home/ubuntu/yocto/poky/meta-poky \ |
| /home/ubuntu/yocto/poky/meta-yocto-bsp \ |
| \ |
| /home/ubuntu/yocto/meta-openembedded/meta-oe \ |
| /home/ubuntu/yocto/meta-ost/meta-ost \ |
| /home/ubuntu/yocto/meta-ost/meta-ost-toradex \ |
| /home/ubuntu/yocto/meta-toradex-nxp \ |
| /home/ubuntu/yocto/meta-toradex-bsp-common \ |
| /home/ubuntu/yocto/meta-freescale \ |
| /home/ubuntu/yocto/meta-freescale-3rdparty \ |
| " |
| </code> |
| |
| and change the machine definition in ''local.conf'' |
| |
<code> | <code> |