Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
Beide Seiten der vorigen RevisionVorhergehende ÜberarbeitungNächste Überarbeitung | Vorhergehende Überarbeitung | ||
software:linux:yocto:x86-rt [2023-07-07 15:21] – Urs Graf | software:linux:yocto:x86-rt [2023-09-19 15:10] (aktuell) – Urs Graf | ||
---|---|---|---|
Zeile 7: | Zeile 7: | ||
- | ===== Getting | + | ===== Getting |
Prebuilt images can be obtained from our [[software: | Prebuilt images can be obtained from our [[software: | ||
- | ===== Installing Images ===== | + | ===== Booting |
- | Currently there are only instructions for booting | + | |
- | + | ||
- | Materials needed: | + | |
- | + | ||
- | * USB Stick | + | |
- | * image.wic file (prebuilt or custom) | + | |
- | * x86 based PC with the ability to boot from USB (any reasonably modern PC should be able to do this) | + | |
- | + | ||
- | ==== Identifying the USB Stick ==== | + | |
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | The easiest way to identify the right block device is usually it's size. | + | |
- | In the example output above, we are looking for a 4GB USB Stick. | + | |
- | We can infer that the USB Stick is ''/ | + | |
- | + | ||
- | If there are multiple devices of the same size as the USB stick it may be necessary to run '' | + | |
- | + | ||
- | ==== Writing the image to the USB stick ==== | + | |
- | + | ||
- | **WARNING: Writing the image to the USB Stick will erase all content!** | + | |
- | + | ||
- | **WARNING: Make absolutely sure you have identified the correct device! dd will not hesitate to override your OS drive if you tell it to!** | + | |
- | + | ||
- | Use the following command to write the image to the USB stick | + | |
- | modifying ''/ | + | |
- | < | + | |
- | sudo dd if=/ | + | |
- | sudo eject /dev/sdX | + | |
- | </ | + | |
- | + | ||
- | ==== Booting | + | |
The USB stick can now be used to boot from USB. | The USB stick can now be used to boot from USB. | ||
Note that the BIOS/UEFI setting to achieve this are hardware specific. | Note that the BIOS/UEFI setting to achieve this are hardware specific. |