Dies ist eine alte Version des Dokuments!


MicroZed Board

The MicroZed contains a Zynq7000 SOC and lots of peripherals.

Key Features

  • XC7Z010-1CLG400C
  • 33.33 MHz oscillator
  • 1 GB of DDR3 SDRAM
  • 128 Mb of QSPI Flash
  • Micro SD card interface
  • 10/100/1000 Ethernet
  • USB 2.0
  • USB-UART
  • 100 User I/O (50 per connector)
  • Configurable as up to 48 LVDS pairs or 100 single-ended I/Software

Manuals

Design Considerations

The board can be powered by the USB connection. For this, your USB must be able to deliver 500mA. In that case the power banks of the FPGA will not be powered.

Configuration Files

Choose a bit-file to load the PL or a mcs-file to load the flash. The msc file contains the bit-file together with a first stage boot loader. See https://deepjava.org/first_example for how to use these files on the Avnet MicroZed board. The files can be found in the deep runtime library under /rsc/

configurationbit-filemcs-fileflink configurationpin mapping
flink1flink1.bitBOOTflink1.mcsInfo Device, Description = ZedFlink 1 27.1.2020 (left adjusted)mapping
GPIO Device, 89 channels
external ADC128S102 Device, 8 ADC channels
external AD7476 Device, 1 ADC channel
flink2flink2.bitBOOTflink2.mcsInfo Device, Description = ZedFlink 2 4.2.2021 (left adjusted)mapping
GPIO Device, 36 channels
PWM Device, 24 channels
FQD Device, 8 channels
PPWA Device, 6 channels
external ADC128S102 Device, 8 ADC channels
external AD7476 Device, 1 ADC channel
UART Device, 2 channels
Watchdog Device
flink3flink3.bitBOOTflink3.mcsInfo Device, Description = ZedFlink 3 15.8.2021 (left adjusted)mapping
GPIO Device, 4 channels
external ADC128S102 Device, 8 ADC channels
external AD5668 Device, 8 DAC channels

Further Documents