Infoportal
Dies ist eine alte Version des Dokuments!
Linux Images
Downloading
x86 & Beaglebone Blue
The images that are currently available for the bblue and x86-rt can be downloaded from the meta-ost Gitlab package registry.
Please note, that these images are built for development, see Development vs Production. For production images you have to built it with a full yocto installation, see Setup and Building or use the eSDK, see SDK's.
Toradex
| Hardware | Overview | Image | Cross Development SDK | Yocto Extensible SDK |
|---|---|---|---|---|
| cb20 | Development Version for cb20 Board | ntb-dev-image-cb20-1.0.tar.xz | ntb-dev-image-cb20-1.0_sdk.tar.xz | |
| cb20 | Development Version for cb20 Board | ntb-dev-image-cb20-1.1.tar.xz | ntb-dev-image-cb20-1.0_sdk.tar.xz | |
| cb20 | Development Version for cb20 Board | ost-dev-image-cb20-2021.05.05.tar.xz | ost-dev-image-cb20-2021.05.05-sdk.tar.xz | ost-dev-image-cb20-2021.05.05-esdk.tar.xz |
Images can also be fetched directly over Toradex Easy Installer. Add the following feed:
https://wiki.bu.ost.ch/infoportal/_media/software/linux/images/image_list.json
Flashing a .wic image
Linux script example for .wic image flashing onto an external storage device, e.g. an external SD card (Beware: sdb has to be replaced with the correct device (use lsblk command to discover the correct device)!):
#!/bin/sh umount /dev/sdb* wipefs -a /dev/sdb dd if=ost-ros-image-melodic-bblue.wic of=/dev/sdb bs=1M status=progress eject /dev/sdb
Extracting the archives
Legacy Images / SDK
Images and SDKs in the tar.xz format can be extracted using the 'tar' command.
tar -vxJf <filename>
Using the Images
Installing
The process for installing images is dependent on the target hardware. Hence, see section „Installing Images“ in
Configuring the Network
See General Network Settings for help to setup necessary network connections.